Australian Standards and building compliance: what you owe, what it costs, and a better way to meet them
Australian Standards decide how a building's fire, electrical, water and safety systems must be maintained, and the owner carries the obligation. Here's what that means in practice, why meeting it is so costly today, and how Accessly takes the expertise burden off your team.
What the Australian Standards are
Australian Standards are technical documents that set out how something should be designed, installed, tested or maintained. They're written by industry committees and published by Standards Australia.
On their own, most standards are voluntary. They become mandatory when a law points to them. That's exactly what building and safety laws do. The building code, state building regulations and WHS laws call up specific standards for the systems that keep a building safe:
- fire protection: alarms, sprinklers, hydrants, extinguishers, fire doors
- emergency and exit lighting
- electrical safety: switchboards, safety switches, portable equipment
- water systems: cooling towers, warm water, backflow prevention
- lifts, escalators and pressure equipment
- height safety: anchor points, ladders, walkways
Each standard spells out what has to be checked, how and how often. Together they turn "keep the building safe" into a concrete maintenance programme.
What they mean for a building owner or manager
When a regulation calls up a standard, its routine becomes the legal minimum, not a suggestion. That has three practical consequences.
The obligation sits with the owner. A contractor does the servicing, but the owner, and the manager acting for them, is responsible for making sure it happens. In NSW, for example, essential fire safety measures in most buildings must now be maintained to the national fire protection maintenance standard, and the Building Commission is clear that building owners are responsible.
Frequency is part of the obligation. A test that is due every six months and done once a year is not "mostly compliant". Half the required checks never happened.
You have to be able to prove it. Most states require an annual statement that the building's safety measures have been maintained. When something goes wrong, the question is never "did you have a contractor?" It's "show me the records".
What owners are obliged to do
Across the states the detail differs, but the core obligations are the same:
- Know what applies. Identify every system in the building that a standard or regulation covers.
- Maintain each one at the required frequency, using people qualified to do the work.
- Keep the evidence: service reports, certificates and records of defects found and fixed.
- Fix what's found. A defect logged and left unrepaired is a documented failure, not a record of diligence.
- Certify annually where the state requires a fire safety statement, and display or lodge it.
Get it wrong and the consequences are real. Queensland, for example, sets penalties for an occupier who fails to prepare and keep their annual occupier's statement. And every Australian jurisdiction has now legislated an industrial manslaughter offence. In NSW the maximum penalty for a company is $20 million.
Why meeting them is so expensive today
Very few teams struggle because they don't care. They struggle because the current way of doing compliance is costly at every step.
The standards themselves cost money. Standards are copyrighted and sold individually. Buying even a couple of them can cost hundreds of dollars, and a typical commercial building touches dozens.
Expertise is scarce and paid by the hour. Working out which obligations apply to a building, and how often each one is due, usually means a consultant, a fire safety practitioner or a long-serving FM who "just knows". When that person leaves, the knowledge goes with them.
Contracts drift from the standard. Service frequencies get set commercially, at tender time, and nobody checks them against what the standard requires. Some systems get over-serviced, which wastes money. Others get under-serviced, which creates risk.
Evidence is scattered. Reports arrive as email attachments, certificates sit in contractors' portals, and registers live in spreadsheets. Assembling it all for an annual statement or an audit takes days of chasing.
Registers only list what's due. Most compliance software gives you an empty register to fill in. It assumes you already know every obligation and frequency. It then tracks the dates you entered, right or wrong.
The result is that most of the cost of compliance goes into finding out and proving what you're supposed to do, rather than the work itself.
How Accessly solves it: the standards come built in
Accessly takes the opposite approach to a blank register. The standards are the starting point, not something you configure.
Obligations set themselves up. Add a property and its assets, and Accessly works out which obligations apply from the state and the equipment on site. It sets them up automatically and keeps them current as assets are added or change. Nobody has to know the standards to get it right.
Frequencies come with their reason. Every obligation comes with its frequency already set, and a label saying where that frequency comes from: required by law, industry standard, or a recommended default. When an auditor or owner asks "why six-monthly?", the answer is on screen.
Maintenance only counts if it actually covers the obligation. Each obligation is matched to the planned maintenance that meets it. The maintenance only counts if it visits as often as the obligation requires. Gaps show up immediately, with a button to set the missing maintenance up.
Completed work is the evidence. When a contractor completes the job and uploads their report or certificate, that becomes the compliance record. Nobody re-keys it into a register.
Checklists are written against the standards, for the checks your own team or a contractor needs to carry out. Nobody builds one from scratch.
The annual statement fills itself in. For NSW, Victoria, Queensland and South Australia, Accessly pre-fills the state's annual fire safety statement from the register. All that's left is the signature.
The practical effect is that the expertise lives in the system, not in one person's head or a consultant's invoice. Your team gets on with the work, and the proof builds up as they do it.
See it on your own buildings
Australian Standards built in is part of AccesslyOS, our full facilities management platform. Book a demo, bring a property list, and we'll show you what your compliance register looks like when it starts from the standard.
Learn more about the standards behind Accessly →
New to essential safety measures? Read our guide: Essential safety measures in Australia, state by state.
Sources
- Building Commission NSW, AS 1851-2012 maintenance standard, updated 12 February 2026
- Queensland legislation, Building Fire Safety Regulation 2008, s55A
- SafeWork NSW, Work Health and Safety Amendment (Industrial Manslaughter) Act 2024
- MinterEllison, Tasmanian Parliament passes industrial manslaughter laws, September 2024